Differences

This shows you the differences between two versions of the page.

--- surv_camera [2024/04/09 23:14] – memeruiz
+++ surv_camera [2024/04/09 23:31] (current) – [Configuration] memeruiz
@@ Line 156: / Line 156: @@
 /dev/ttyAMA0 existed before but it doesn't work by default. After activiting miniuart-bt it starts working
+With this configuration two uart units are activated
+Bluetooth is not necessary to be disabled. Apparently it is already disabled on MotionEyeOS. Also the console is not redirected to the serial.
 Test with a loopback cable between tx and rx and with this test program:
@@ Line 177: / Line 181: @@
     except IOError:
       print ("Error on", port,"\n")
+== Wanderer ==
+For the serial connection to the wanderer we used:
+https://github.com/rosswarren/renogymodbus
+It must be converted to python2 along with several dependencies
+It works!
+== references ==
+https://di-marco.net/blog/it/2020-06-06-raspberry_pi_3_4_and_0_w_serial_port_usage/
+https://www.raspberrypi.com/documentation/computers/configuration.html#configuring-uarts