• Download patched 2.50 firmware version from (filename 3000XSeries.02.50.2019022736_patched.zip):

https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg2945740/#msg2945740

• Download license patched file from (v241linkinstall.zip):

https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg1189010/#msg1189010

• Extract this file, edit infiniivision.lnk with:

  80#infiniivisionLauncher.exe -l DIS -l MSO –perf -l BW20 -l SCPIPS -l CABLE -l VID

• Copy firmware file (.ksx) to USB drive. If your current firmware is older than 2.41 then rename this file to .cab
• Copy licence file (2x .cab files and .lnk file) to same USB drive
• Go to scope, turn on and plug USB to front panel.
• Press [Utility] > File Explorer, select the firmware file (3000XSeries.02.50.2019022736patched.cab); then, press Load File, wait for scope to load and reboot. * Check firmware has updated to v2.5, if successful continue * Press [Utility] > File Explorer, select v241link_install.cab file; then, press Load File, wait for scope to load and reboot.

• Update original 2.5 firmware. Similar instructions in this video:

• Modify (patch) binary infiniivisioncore.dll in the following way:

  3000A series:
  firmware: 2.50

  ---

  1) options patch: 0x2815f4 –

  > "04 00 A0 E1" --> "00 00 A0 E3"

  2) nag patch:      0x2aae50  --> "CD 59 FF EB" --> "01 00 A0 E3"

  • Use this video with similar instructions (patch is for older firmware):

  {

  { ::mischo22_final.mp4 | Second video}}