User Tools

Site Tools


gps_to_i2c_and_magnetometer_board

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
gps_to_i2c_and_magnetometer_board [2012/03/08 11:43]
memeruiz
gps_to_i2c_and_magnetometer_board [2012/03/08 12:37] (current)
memeruiz
Line 18: Line 18:
   * To program the stm32 we could use either JTAG or serial with http://​code.google.com/​p/​stm32flash/​ or http://​tuxotronic.org/​wiki/​tutorial/​stm32primer-flash-over-uart   * To program the stm32 we could use either JTAG or serial with http://​code.google.com/​p/​stm32flash/​ or http://​tuxotronic.org/​wiki/​tutorial/​stm32primer-flash-over-uart
  
 +===== Specific design notes =====
 +
 +  * For the HMC5883L the capacitors of 4.7u and 0.22u must have a low ESR (resistance) < 0.2 ohms. 0402 smd capacitors may not work.
 +  * 
  
  
  
gps_to_i2c_and_magnetometer_board.txt ยท Last modified: 2012/03/08 12:37 by memeruiz