multiwiicopter
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
multiwiicopter [2012/01/27 15:19] – memeruiz | multiwiicopter [2021/02/01 05:55] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 22: | Line 22: | ||
* Set of files | * Set of files | ||
* Dremel (for making holes for screwing the battery tray) | * Dremel (for making holes for screwing the battery tray) | ||
+ | * Table drill (for making cone holes in the motor carbon fiber mounts for the flat screws) | ||
* Soldering Iron | * Soldering Iron | ||
Line 33: | Line 34: | ||
* Cable ties. | * Cable ties. | ||
* Solder/ flux paste | * Solder/ flux paste | ||
+ | * Cyano-acrylate glue and accelerator | ||
+ | |||
===== How to use it / How does it works ===== | ===== How to use it / How does it works ===== | ||
Line 68: | Line 71: | ||
http:// | http:// | ||
+ | |||
+ | ===== Programming/ | ||
+ | |||
+ | The multiwiicopter uses an arduino as the FC unit. You can program this board from debian by installing arduino package. You get version 1.0 with a relatively new gcc-avr. You have three ways to program the arduino pro mini: | ||
+ | |||
+ | - From arduino sketch, using upload function. | ||
+ | - From arduino sketch, using upload with avrdude function. | ||
+ | - Connecting an avr isp to the spi pins of the board (this may interfere with other electronics on the multiwiicopter, | ||
+ | |||
+ | In 1 and 2 you only need to specify the port device to program the arduino. In 3 you need to solder four wires and use an avr isp programmer board. Options 1 and 2 work fine with multiwiicopter. Version 3 is only necessary if more flash is needed and bootloader can be erased. | ||
+ | |||
+ | To read the flash/ | ||
+ | |||
+ | / | ||
+ | |||
+ | http:// | ||
+ | |||
+ | If you want to program without arduino sketch take a look at / | ||
+ | |||
+ | ===== Calibration/ | ||
+ | |||
+ | ==== Altitude hold ==== | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
multiwiicopter.1327677593.txt.gz · Last modified: 2021/02/01 05:55 (external edit)