Differences

This shows you the differences between two versions of the page.

--- hardharware_tricks [2020/12/01 04:13] – memeruiz
+++ hardharware_tricks [2026/09/30 10:45] (current) – memeruiz
@@ Line 1: / Line 1: @@
 ====== Hardware Tricks ======
-===== Upgrading with all features the DSOX2002A osciloscope =====
+[[Upgrading with all features the DSOX2002A osciloscope|dso2002a_hacking]]
-  * Download patched 2.50 firmware version from (filename 3000XSeries.02.50.2019022736_patched.zip):
+[[Unbricking a Buffalo WZR-D1800H|unbrick_wzr_d1800h]]
-[[https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg2945740/#msg2945740]]
-  * Download license patched file from (v241_link_install.zip):
-[[https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg1189010/#msg1189010]]
-  * Extract this file, edit infiniivision.lnk with:
-#infiniivisionLauncher.exe -l DIS -l MSO --perf -l BW20 -l SCPIPS -l CABLE -l VID
-  * Copy firmware file (.ksx) to USB drive. If your current firmware is older than 2.41 then rename this file to .cab
-  * Copy licence file (2x .cab files and .lnk file) to same USB drive
-  * Go to scope, turn on and plug USB to front panel.
-  * Press [Utility] > File Explorer, select the firmware file (3000XSeries.02.50.2019022736_patched.cab); then, press Load File, wait for scope to load and reboot.
-  * Check firmware has updated to v2.5, if successful continue
-  * Press [Utility] > File Explorer, select v241_link_install.cab file; then, press Load File, wait for scope to load and reboot.
-==== References ====
-Easy general instructions
-[[https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg2364363/#msg2364363]]
-How to patch firmware with IDA
-[[https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg1453285/?topicseen#msg1453285]]