I bought the Carbon SCARAB YSiix v2 - full ARF Multiwiicopter.

You can find product information here: http://www.multiwiicopter.com/products/sku-21

This product comes without some other necessary things to be able to fly it. The problem is that there are a lot of choices for the different extra components. My main goal is to build a multicopter that is stable in wind, can carry a big good camera (Nex-3/5/7), long flying time, long range, telemetry (for monitoring temperature, voltage, position, heading, more), and possibility of expansion to add FPV (first person view). I will describe my choices and the reasons why I chose them.

• The control: FlySky FS-TH9x (aka Turnigy 9x)
• The transmitter: frsky DJT telemetry module
• The receiver: frsky D8RSP telemetry module
• The batteries:
• The battery charger:

During assembling I discovered several tricks that have to be applied.

Tools needed not included:

• Hex screw driver 3/36

Materials not included:

• 4x Board nylon stands (for VoltAir) , nuts and screws
• 1x 2×3 bended poles for servo connectors. (For Paris 600 Yhexii board)